Reimagining mobility, quietly.
AVI Worldwide is a global supplier of NVH — noise, vibration and harshness — solutions to the automotive, agriculture and industrial sectors. Manufacturing in India since 1970.
About usPioneering successful journeys.
Established in 1970 under the guidance and principles of our founder, the late Mr. Manoharlal Khanna, AVI Worldwide has emerged as a leading global supplier of NVH solutions to the automotive, agriculture and industrial sectors.
Spearheaded by three generations of the Khanna family over five decades, AVI began as a small domestic firm. Our strength lies in the breadth of the range and the quality of the products we offer under a single roof — more than 5,000 international-quality products across 50,000 parts, manufactured across 400,000 square feet in Mumbai and Daman.
Excellence is our driving principle.
Over 50 years and growingMr. Arun Khanna
Global brand identity, strategic market expansion and international client relations.
Mr. Vipin Khanna
Technical operations, plant architecture and global product compliance standards.
Mr. Karan Khanna
Leads global sales and customer relationships, alongside corporate infrastructure, professionalised operations and enterprise scaling.
VisionCharting the way forward.
Make a Noiseless Automotive Revolution through continuous research and process improvisation.
Our visionTo develop and manufacture noiseless automotive products through continuous research, process improvisation and rigorous quality testing — and to maintain our stature as the most trusted supplier of NVH solutions globally, meeting the expectations of our customers through innovation and quality.
Customer satisfaction
Our management and employees are committed to delivering desired customer satisfaction at every touchpoint.
Enduring partnerships
Long-term corporate relationships built on transparency, consistency and shared operational values.
Continuous research
Ongoing development of NVH performance across the range, driven by our own engineering teams.
Rigorous testing
Every product characterised against the customer’s specification before it is released.
TechnologyTreading new paths.
AVI Worldwide takes pride in designing a wide range of NVH solutions, adhering to the highest standards of quality and innovation. Our approach begins with a thorough analysis of the vibration characteristics of every component in the system.
Our highly skilled technicians tailor products for optimum performance, supported by continual investment in current technology and design capability that includes 3D modelling with static and dynamic performance simulation.
Built to hold. Tuned to absorb.
Both are stiffness, and they are wanted at different moments. Ask what a mount’s rate is and the useful answer depends on when you ask — at what frequency, and at what amplitude.
The two duties sit at opposite ends of both scales. Controlling the engine is a low-frequency, large-amplitude problem: the engine bouncing on its mounts under acceleration, cornering and braking. Isolation is a high-frequency, small-amplitude one — the range the driver hears as boom and feels through the steering wheel.
Conventional mount — rubber alone, tuned by its shape and compound: one fixed compromise between holding the engine and isolating it.Hydraulic mount — the same rubber with a fluid circuit inside, so the damping can be concentrated at the engine’s resonance while small, fast inputs still pass through soft.
Rubber alone will not do both. Its dynamic stiffness rises with frequency and rises again as amplitude falls — stiffest exactly where the car needs it softest. The fluid chamber and the decoupler exist to correct that.
And the mount has to hold that behaviour for a decade of load reversals, through heat, cold and road salt. Designing the stack-up is one discipline; holding it in production, part after part, is the harder one.
- Outer housingThe interface to the body
- Elastomer springCarries the load
- Fluid chamberDamps the low frequencies
- DecouplerReleases the small, fast inputs
- Inner coreThe interface to the engine
- Crimped coverSeals it for life
What we measure, and why.
A mount is specified by numbers, not shapes. Every part we develop is characterised in our own laboratory — static and dynamic stiffness, measured in four axes — and each result is checked against the customer’s specification before the part is released.
New product developmentFrom drawing or part
to precision design.
Our new product development team takes a drawing, a concept or a customer sample through to a validated production part — engineering, design and laboratory validation under one roof. Every prototype is cross-verified against the customer’s own test specification before release.
Either starting point.
One standard at the end.
We develop from either starting point. With a drawing and a specification, engineering works forward from the print. With only the part in hand, the geometry, the materials and the compound are all established here first. Multi-component assemblies, where several parts share a single load path, are ordinary work rather than the exception.
Geometry is never the whole answer. The compound is characterised in our own laboratory so that the elastomer answers a load the way the design intends, and every prototype is measured against the customer’s specification — static and dynamic stiffness in four axes — before release. Whichever route a programme takes, the prototype we hand back is held to the standard of the production part that follows it.
Quality commitmentBridging the gaps.
Quality has always been at the heart of everything we do. Our engineers perform quality checks at every stage of production, recorded through our ERP system, and every product is tested against the customer’s specification before release.
TQM
Total quality management embedded across every department.
Poka-Yoke
Error-proofing designed into the process, not inspected in afterwards.
5S
Disciplined workplace organisation as the basis of consistent output.
Kaizen
Continuous, incremental improvement driven by the teams doing the work.
Automotive quality management system
Environmental management system
Occupational health & safety management
Current certificates, scope statements and audit reports are available to customers on request.
ProductsWhat we make.
More than 5,000 international-quality products across 50,000 parts — best-in-class replacements for OEM components in passenger and commercial vehicles, agricultural machinery and industrial equipment.
Engine Mounting
Isolating engine excitation from the body.
Hydraulic Mounting
Fluid-damped, for idle-shake control.
Transmission Mounting
Gearbox and cross-member isolation.
Propeller Shaft Mounting
Centre-bearing support and decoupling.
Strut Mounting
Top mounts with integrated bearing seat.
Anti-Roll Bar Bush
Stabiliser bushes, car and commercial.
Control Arm Bush
Bracketed bushes locating the arm to the body.
Link Engine Mounts
Torque-rod and link-type mounting.
Clutch Fork
Release-fork assemblies.
Suspension Bush
Spring-eye, shackle and subframe bushes.
CV Boot
Constant-velocity joint boots.
Steering Boot
Rack-and-pinion bellows.
Exhaust Hanger
High-temperature hangers and isolators.
Brake Pedal
Pedal pads and bonded components.
Industrial & Agriculture
Machine feet, cab mounts, genset isolators.
Also manufactured: suspension and spring bushes, and steering couplings.
DistributionA trusted global
export partner.
AVI exports across the world. Our core competency lies in understanding region-wise business requirements and manufacturing precisely to meet them — supplying seven markets across three continents from our plants in Mumbai and Daman.
The Americas
- United States
Europe
- United Kingdom
- Germany
- France
- Italy
Asia-Pacific
- Australia
- New Zealand
Thirty-three awards across four decades.
Recognised by the Government of India, CAPEXIL and FIEO for consistent export performance — on quality and on volume — since 1987.
From a small domestic firm in 1970 to a supplier recognised across three continents.
RecognitionA legacy of
export excellence.
From our first National Award in 1987–88 to six consecutive Top Export Awards from 2017 onward, AVI’s export performance has been recognised by the Government of India, CAPEXIL and FIEO — across four decades of global trade.
Social responsibilityBeyond the factory gate.
Our responsibility to the environment and to the people around us is built into how we work, not bolted on beside it. It begins inside our own plants, with manufacturing practices held to the highest standards so that we operate with the least possible effluent, and it extends outward from there.
Beyond our own operations we contribute through independent registered trusts and societies, across four areas.
Where we contribute
Environment
Our plants run under ISO 14001. We hold our processes to the highest standard we can reach so that the least possible effluent leaves the site.
Education
Contributions to registered bodies working in schooling and learning, including education for children who need specialist support.
Health care
Contributions to registered medical trusts and care institutions providing treatment to people who need it.
Community welfare
Contributions to organisations working on welfare in underserved communities, including those near the areas where we manufacture.
Each organisation we support is an independent registered body, accountable for its own work. Programme details and contribution records are available on request.
ContactGet in touch.
Corporate office
AVI Worldwide Pvt. Ltd.
201, Bhagtani Krishang, A-Wing
Dattatray Road, Santacruz (West)
Mumbai 400054, India
+91 22 3511 4433
Manufacturing — Navi Mumbai
C-257, TTC Industrial Area
MIDC, Pawane
Navi Mumbai 400710, India
+91 22 6825 9999
Manufacturing — Daman
Plot No. 14, Survey No. 370/2
Kachigam–Vapi Road, Char Rasta
Village Kachigam, Daman 396210
Dadra & Nagar Haveli and Daman & Diu, India
+91 260 3520900